Vehicle Inspections in Saskatchewan: When You Need One and What They Cost

Saskatchewan does not require a yearly safety inspection for ordinary passenger vehicles. You need one mainly in two cases: the vehicle was last registered outside Saskatchewan, or it was a total loss. A mechanical safety inspection costs the station's shop rate times 1.5 hours for small vehicles and times 2 hours for large ones, plus GST.

Table of contents
  1. Which inspection you need
  2. What an inspection costs
  3. Mechanical safety inspection, step by step
  4. If the vehicle fails
  5. Total loss vehicles
  6. Body integrity inspection: start before you repair
  7. Exemptions
  8. Related guides
  9. Frequently asked questions
  10. Sources

Which inspection you need

SituationInspection required
Vehicle last registered in another province or countryMechanical safety inspection
Total loss vehicle with structural damageBody integrity inspection, then a mechanical safety inspection
Total loss vehicle with cosmetic damage onlyMechanical safety inspection
Motorcycle, first time registered here or total lossMotorcycle mechanical inspection
Any vehicle SGI or police order to be inspectedWhatever inspection or repair they specify

If you are told to have a vehicle inspected or repaired and you do not, SGI can cancel its registration and insurance, refuse to renew it or refuse to register it.

What an inspection costs

Mechanical safety, small vehicles up to half-ton trucksShop rate x 1.5 hours
Mechanical safety, large vehiclesShop rate x 2 hours
MotorcycleShop rate x 1 hour
Body integrityShop rate x the actual time taken, which depends on the damage
TaxGST only

A four-wheel alignment check is included in the mechanical safety inspection. An actual alignment, adjustments or repairs cost extra.

Mechanical safety inspection, step by step

  1. Book with an SGI-certified vehicle inspection station.
  2. Take the vehicle in. The station cannot start repairs without your permission.
  3. If it passes, you receive a Mechanical Safety Inspection Certificate and a passed Record of Inspection.
  4. Take a copy of the certificate to any motor licence issuer to register the vehicle.
  5. Keep a copy for your records.

The inspection does not cover the engine, transmission, air conditioning or surface rust that does not affect the structure. A pass is not a warranty on the vehicle.

If the vehicle fails

  • You get a Failed Record of Inspection listing every defect, and the station must explain each one if you ask.
  • You can have the repairs done at any shop.
  • You have 30 days to return for reinspection.
  • The first reinspection is free if no major parts have to be removed and no alignment check is needed.
  • After 30 days you need a full inspection again, at your cost.

Total loss vehicles

  • A vehicle is a total loss when the repair cost plus its salvage value is more than the vehicle is worth.
  • If it is still registered, it must be inspected within 60 days or before the registration expires, whichever is first.
  • If it is not registered, you need a 24-hour permit to drive it from the repair shop to the inspection station.
  • Once it passes, it is branded a rebuilt total loss vehicle.

Body integrity inspection: start before you repair

  1. Book an initial inspection with a certified body integrity station before any repair work begins.
  2. Bring a Cross-Canada VIN search, or a third-party report such as CARFAX, and proof of ownership.
  3. The station photographs and measures the vehicle and writes a Rebuilt Vehicle Work Plan that you both sign.
  4. Repairs follow that plan. Do not apply sealant, sound-proofing or rust-proofing until the station has checked the joints.
  5. The whole inspection must be finished within 120 days, by the same station that started it.
  6. After it passes, the vehicle still needs a mechanical safety inspection.

Exemptions

  • Some vehicles moving from Alberta or British Columbia are exempt under the New West Partnership. See bringing a vehicle into Saskatchewan.
  • First-time registered motorcycles from model year 1987 or older are not subject to inspection.

Questions go to SGI Vehicle Standards and Inspection at 306-775-6188, or toll-free 1-800-667-8015 ext. 6188.

Frequently asked questions

Does Saskatchewan require annual vehicle inspections?

Not for ordinary passenger vehicles. An inspection is required when a vehicle was last registered outside Saskatchewan, when it was a total loss, or when SGI or law enforcement orders one.

How much is a vehicle safety inspection in Saskatchewan?

The station charges its shop rate times 1.5 hours for small vehicles and times 2 hours for large vehicles, plus GST.

How long do I have to fix a failed inspection?

30 days to return for reinspection. After that a new full inspection is needed.

Is the reinspection free?

The first one is, as long as major parts do not need to be removed and no alignment check is required.

Do I need an inspection for an out-of-province vehicle?

Yes, a mechanical safety inspection, unless it qualifies for the New West Partnership exemption.

Sources

Last reviewed November 14, 2026. Fees and requirements are set by SGI and can change, so confirm them before you go. MyRegistrySask is an independent guide and is not affiliated with SGI or the Government of Saskatchewan.

Liam Friesen

Liam Friesen

I´m a web project creator and digital publisher based in Canada. Through practical guides and streamlined online tools, he simplifies complex local processes—such as vehicle registration and licensing rules in Saskatoon—to help residents navigate everyday administrative tasks with ease.

Go up